DARLEX
Aluminum
Extrusion
Framing
Solutions DARLEX's structural aluminum extrusion
framing solutions, with its wide choice of profile sections, connectors, and
accessories is oriented to the designers’ and users’ needs. We can
only give you the highlights of the many ways you can use the system to your
advantage. Here are some of the most interesting design features.
THE MATERIAL
The profiles are the 6000 Series of aluminum,
extruded in conformance to DIN 17615 or similar standards. All unmachined
surfaces are natural anodized to a minimum thickness of 12 µm; or powder
coated in safety yellow; or powder coated to your specifications. With a
tensile strength of 250 N/mm2. DARLEX offers strength and stability for sound
designs.
PROFILE CROSS SECTION
Planned for maximum strength
relative to weight. Note the hollow cores which provide exact alignment for the
connectors and because of the rifling grooves, are easy to tap for a M16 thread
— for feet or caster stems.
LONGITUDINAL SLOTS
The 10 mm
wide slots serve several purposes. They are the retainers for the “T”
heads of the connectors, and receptacles for “T” bolts and insertion
nuts. They also serve as grooves for panels (tempered glass, plastic,
particleboard, guard mesh, etc.). By using a slot reducer accessory, the width
can be reduced to 8 mm or 6 mm.
TRACKED PROFILES
Two sizes
of tracked profiles are available for sliding panel designs.
POWER
PROVISION
The 50 x 100 and 100 x 100 have central and auxiliary
longitudinal chambers which can serve as pneumatic manifolds with distribution
options, cylinders for actuators, wiring channels, etc. |
|
